1• Parallelogram

2• Safety clutch


Each metering unit is equipped with an audible safety clutch system with automatic clutching for optimal protection of the metering system.

3• Clod remover bracket

The adjustment of the clod removers is precise (12 positions) and rapid due to the adjustment system with locking pins.
In order to suit different planting conditions, the clod removers are rapidly interchangeable with the trash wheels and this with no tool.

7• Open rear press wheel unit


The new open rear press wheel unit gives better clearance in sticky conditions.
The new off-set adjustments and the spacing of the 2 press wheels enable optimal furrow closing no matter what the conditions (stones, trash, hard soil, …).

5• Gauge wheels

Large depth gauge wheels (110 mm) ensure an efficient and uniform depth control.
Resting on the ground directly in line with the seed drop ensures the unmatched depth consistency that makes the reputation of the NG Plus.
The independent gauge wheels are mounted on an equalizing rocker bar which ensures uniform depth control even when one wheel encounters an obstacle (eg: stones).

10• Front facing
The front facing of the metering unit integrates the passage of the vacuum hose and the seed monitor and signal kit cables.

8• Depth adjustment

9 • Hopper

6• Gauge wheel arms

4• Double discs

The planting system is made up of two large diameter discs (380 mm) mounted on sealed ball bearings. Together with the inner shoe, this system ensures a constant depth control and planting quality no matter what the planting conditions.